• UL certified 4ft U bend magic tube ZY-T8-15W1200 BONT LED TUBE

UL certified 4ft U bend magic tube ZY-T8-15W1200 BONT LED TUBE

Product Code:ZY-T8-15W600U
Availability:In Stock
Input Voltage: AC100-277V Lumens: 1100 lm.
  • $133.50 15 Per Case


0 reviews Write a review

Basic Feature

- James Magic tube type T8 dual function which can work with specific ballast and without any ballast is an energy saving product as special replacement for traditional flourescent T8 lamps.
- Designed to operate on existing all instant start ballast,rapid start ballast and programmed start ballast and emergency fixture with input voltage of AC120-277V, AC347V.
- This magic tubes minimize labor and recycling costs.
- THD less than 20%, Power factor more than 0.90.
- Reduces energy consumption up to 40%.
- Stable lumens output for different ballast brand with different ballast factor.
- No UV emission.
- This tube can work with specific electronics ballast and also without any ballast.

Detailed Data

- Model Name: T8-15W1200 BONT LED TUBE          
- Wattage: 15W
- Life Span: 50000 Hours                                                                                     
- Weight: 360g
- Led Chip: 130 pieces of SMT 2835                                                                           
- Power Factor: More than 0.90
- Efficiency: l40 lm/W
- Certificates:UL,cUL,NSF,Lighting Facts,FCC

Installation Instruction

Prepair for Installation

- Check the ballast installed in the field and make sure the ballast is in manufacturer's ballast list. If the ballast out of the list, a test must needed before mass installation.
- Loose and damaged lamp holder and socket need to be adjusted or be replaced.

"Plug" and "Play" procedure


- Turn off the power to the light fixture at the breaker panel before installation.
- Open the diffuser from the light fixture.Ensure pins are firmly seated in lampholders.
- Remove the flourescent tubes,Please dispose of these items properly as they contain mercury.
- Loose or damaged end cap and lampholder need to be replaced before installation.


Specification

Please click here to download specification

Write a review

Note: HTML is not translated!
    Bad           Good