- James MAGICFIT Type A Plug and Play T8 direct replacement led tubes are an energy saving product as special replacement for traditional flourescent T8 lamps.
- Aluminium housing.
- Designed to operate on existing instant start ballast,rapid start ballast, programmed ballast, dimming ballast and also emergency fixture with input voltage of AC120-277V, AC347V.
- This magic tubes minimize labor and recycling costs.
- THD less than 20%, Power factor more than 0.95.
- Reduces energy consumption up to 50%.
- Stable lumens output for different ballast brand with different ballast factor.
- No UV emission.
- This tube only work with specifical electronics ballast and can not work with any magnetic ballast.
- Model Name:BT816W4FT Plug and Play Led Tube
- Wattage: 16W
- Life Span: 50000 Hours
- Led Chip: 120 pieces of SMT 2835
- Power Factor: More than 0.95
- Efficiency:l20 lm/W
- Certificates:DLC 4.0, UL,cUL,NSF,FCC
Prepair for Installation
- Check the ballast installed in the field and make sure the ballast is in manufacturer's ballast list. If the ballast out of the list, a test must needed before mass installation.
- Loose and damaged lamp holder and socket need to be adjusted or be replaced.
"Plug" and "Play" procedure
- Turn off the power to the light fixture at the breaker panel before installation.
- Open the diffuser from the light fixture.Ensure pins are firmly seated in lampholders.
- Remove the flourescent tubes, Please dispose of these items properly as they contain mercury.
Please click here to download specification